Comentarios VEVOR Mini torno, 2,76 x 6,3 pulgadas, 24 V CC, 96 W, minitorno de madera, accesorios para fresadora, 7 velocidades, 4220/5300/5650/6350/6660/7050/8450 RPM, para bricolaje, carpintería, taladro rotativo, herramienta

Opiniones de los Clientes

4.4 Fuera de5

Basado en 11 reseñas

Calificaciones por características

Precio 4.8
Calidad 4.7
Características 4.7
Uso sencillo 4.7
Ver más Ver menos

11 Reseña(s)

Texto, imagen, video

Solo fotos

Solo videos

Toda estrella

5 estrellas solamente

4 estrellas solamente

Solo 3 estrellas

Solo 2 estrellas

Solo 1 estrella

Más reciente

Más útil

Filtros claros

Gnarly Gorilla

Under Rated Micro Lathe

Revisado el Mar 07, 2025

They say this is not for turning pens daily but I have found that to not be true. I do think this lathe needs 2 styles of rests because the one provided is sometimes too small. Easily fixed with a piece of aluminum angle, but still. There is a level of patience required to setup the piece you want to turn. This machine is customizable to work better. For example, sometimes...but not frequently...the provided tip to hold the material is too small. Easily replace with a cut drywall screw or wood screw. You can also purchase separately an adjustable chuck, which fits inside the key chuck provided. That makes some types of turning better on this lathe. I highly recommend after using it but YouTube is lacking on videos for these. The media reviews at the time I write this review are poorly done or done by influencers that don't really try using it properly. Do not compare these to mini lathes. Mini lathes are around $200-$300 dollars and more powerful than this micro lathe.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Jane Grey

Lathe as a Bobbin Winder

Revisado el Feb 24, 2025

I'm a weaver and a member of my weaving group mentioned using a lathe to wind yarn onto bobbins for weaving looms. Actual winders can be quite expensive, but this mini and affordable lathe works perfectly for my needs.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

L. Rodriguez

Good value

Revisado el Feb 10, 2025

It works for my particular purpose which is small handles. However, the included spur is useless I had to make my own, same for the support piece, way too small and once you place anything on the lathe, you cannot have access to the adjusting nut. I made my own piece from a Stanley bracket. The shaping tools included are useless, I would recommend the manufacturer to ditch them and include a spur and wider support piece.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 1 personas encontraron esto útil

nic

Good for little projects

Revisado el Feb 07, 2025

Just know that it's for little jokes, and tighten that chuck!!

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

James

Hobbyist

Revisado el Nov 29, 2024

It's what you would expect. Needs adjustments to be true. Decent quality. Adjust the tail stock and it works as it should.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Justin

This unit works

Revisado el Jun 30, 2024

This unit works as advertised. It is a bit weak but it is what was advertised. The motor can be easily replaced with a 550/540 can motor.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Mary

Owner

Revisado el May 20, 2024

As long as it doesn't break within the first week of being able to use it I guess it will be okay. My flex drive grinder internal shaft broke the first time I used it. Been having a tough time with kidney replaced in warranty with this company. Going to give this what a chance I need will determine whether or not I buy anything else from this company.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Rich

Purchaser

Revisado el Mar 28, 2024

Everything I expected!!! I'm using it for making wooden rings and it works great for turning them. the only "not so good" is the quality of the turning tools, however i purchased it for the lathe not the tools. I would recommend for it small turning.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

Pete

Owner

Revisado el Mar 10, 2024

I am very happy with this little machine and it's just perfect for making turned stanchions for my model ships. I had never owned or run a lathe before so I was quite surprised at how easy the machine worked and with my fist sample stanchion produced too. It's a great hobby tool and I intend to get a bigger one for turning masts and spars in the near future.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

LeatherMasterKW

Owner

Revisado el Jan 12, 2024

The VEVOR Mini Lathe Machine, 2.76 in x 6.3 in, 24VDC 96W Mini Wood Lathe is about what one would expect for this price. Functional for very small projects; low torque, fixed (unchangeable) headstock with limited strength to hold spindles. There are no accessories available for this unit. Probably a good value for learning or a hobbyist with very low expectations.

Ver más Ver menos

Útil Enviando comentarios... Gracias por tus comentarios. 0 personas encontraron esto útil

1 2

Reseñas de clientes para VEVOR Mini torno, 2,76 x 6,3 pulgadas, 24 V CC, 96 W, minitorno de madera, accesorios para fresadora, 7 velocidades, 4220/5300/5650/6350/6660/7050/8450 RPM, para bricolaje, carpintería, taladro rotativo, herramienta

Opiniones de los Clientes

Calificaciones por características

Quien compró este articulo también compró