There appears to be some good engineering on this thing. It has weight and mostly good welds. It's not perfect. Definitely a rush on the assembly line. The only thing out of the box that needed fixing were the two side racks. They are supposed to be bent at 90 degrees to be perpendicular. They were way off. I was able to bend them by hand with a vice. The biggest concern is the gap on the front door. It is due to a poorly angled hinge that pulls it away. Everything collapses and folds. The stove top piece has eight thumb screws but you really only need 4 to hold it steady. After 15 minutes of fire, the stove top reached 390F and the chimney reached 260F.