33 Reviews
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Owner
These bits are very sharp. They cut a perfect no burr hole with little effort. We use them to drill 5/16” angle iron with no trouble.
0
Cutting Depth : 25 mm ; Quantity of Accessories : 6 Pieces ; Knife Handle : Right Angle Universal Handle ;
These cutters look very good, but did not try them in action yet
I bought this set for my vertical mill. Also bought the Accusize R8 to 3/4\" Weldon arbor to hold the cutters. Unfortunately the arbor had big bore runout and had to be returned. Most likely will make my own arbor out of a 3/4\" end mill holder. The cutters come in a nice plastic box. Each cutter is secured in a rubber insert plus the cover has a foam cushion. All cutters are nicely ground and sharpened. The cutter ID is 1.25\" deep, so it will allow a little more than 1\" drilling depth. Both OD and ID are tapered to reduce friction and provide for a free cutting action. The shank diameters are very uniform and are about .0005\" below 3/4\" nominal size. The tool set includes a decent 8 page printed manual. It is written in Chinglish of course, but it is a nice touch. I did not use the cutters yet, but this looks like a very nice tool set. I could not check the heat treatment and I have seen a few reviews with broken cutters. The time will tell a full story. Wait for the update.
0
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
They worked pretty good
They are pretty good for a cheap set. I have only use them a few times and they worked. I do not expect them to last a long time.
0
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Owner
Good quality bits, I just wish you could buy a set of all the same size that gets used most. Drilled 60 holes with one bit and still working like new.
1
Cutting Depth : 50.8 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Welder/ machinist
Great cutters for the money. Will hold up to a lot if used correctly.
0
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Owner
Very disappointed with the VEROR company. THEY SOLD ME THIS ANGULAR CUTTER SET ALONG WITH A MAG DRILL. THIS CUTTER DOES NOT FIT THE DRILL THEY SENT ME. THEY HAVE THE WORST SERVICE DEPARTMENT EVER NO SERVICE PHONE NUMBER TO CALL. I’VE ASKED HIM A HALF DOZEN TIMES TO LET ME KNOW WHAT BITS WILL ACTUALLY FIT THIS DRILL. I STILL HAVE NOT RECEIVED ANY INFORMATION BACK YET. I WANTED TO SEND THESE BACK AND GET A REFUND. WHICH THEY WILL NOT DO. SO ANYTHING YOU BUY, THEY WILL NOT TAKE BACK! VERY DISAPPOINTING COMPANY!
4
Cutting Depth : 50.8 mm ; Quantity of Accessories : 6 Pieces ; Knife Handle : Universal Handle ;
Owner
Great cutters great price nice carry case to we will see if they last a long time my bet is they will
0
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Diesel truck technician
Great bits low cost fast shipment sharp durable fast drilling . Molded case holds bits in order for quick use .
0
Cutting Depth : 50.8 mm ; Quantity of Accessories : 6 Pieces ; Knife Handle : Universal Handle ;
Well made
The finish on these is wonderful. They are well made and work great. Not to mention I really like the case they come in so they aren't banging around and getting dull.
1
Cutting Depth : 25 mm ; Quantity of Accessories : 13 Pieces ; Knife Handle : Right Angle Universal Handle ;
Chews through steel like it nothing.
These things absolutely chew through mild and high carbon steel like it's nothing! And the hole is a perfect circle.
0