Customer Reviews for VEVOR Soybean Grinder Commercial Grinding Machine for Spices 3000W Corn Mill Grinder 50-60 KG/H Stainless Steel Corn Grinder Industrial Flour Milling Machine for Pepper Soybean Peanut Herbs Grains

So I had heard some disconcerting reviews about some things pertaining to this mill. None of them were valid criticisms for the one I received. Assembly was easy. Mine came with an on off switch. There are some things that you do have to pay attention to like proper alignment of the mill stones. I did cut a gasket to fit around the Millstone cover plate. I noticed mine did have a little bit of a gap so I tried a thin slice of Teflon, one of those cutting boards and that was too thin so I took a Keurig coffee pod box flatten it out Cut a circle with a 7 1/16 ID and about a quarter inch wide and sandwiched in between the spinning stone and the cover plate and it worked perfect. There’s no flour dust flying out of mine. I’ve used it several times. It worked great. I love mine. April 9th, 2024

This arrived packaged very well. The stainless steel hopper was even crated in a small wooden box within the cardboard box. Setup was easily and somewhat intuitive, which is good because the 'instructions' are not useful at all in both operation or set up. You just kind of guess your way through it. I use it to grind corn for calves. Functionally it works well and can grind the corn very find or can just crack it. It comes with two different sets of grinding mills for a coarser or finer grind (the instructions tell you nothing about this). It also has an on/off switch which other lookalike models don't have. A 5 gallon buck fits right underneath it. It does make a lot of dust. I grind into a 5 gallon bucket with the lid cut in half, which cuts down on a lot of the dust.

Worked well, feed looked nice when finished. Quality was great.

Great little mill for homestead use!! I use it to make feed mixes for my livestock as well as selling some feed. It’s not quite enough to be efficient for selling feed. At its best I can manage about $25/hr profit grinding feed that I sell. If you’re looking to grind feed for your small homestead or to get started in selling some feed this unit is amazing!!! Plan on upgrading if you’re going to be selling feed though. Only a couple complaints: 1) grinding plate adjustment needs constant monitoring. 2) funnel mount is plastic and unstable. I definitely recommend getting this thing if you’re using it for livestock feed!!!!

. Did have a litte damaged in shipping but they took care of it right away. Works great don’t take long to grind.

Love it, absolutely works as it should. I can’t wait to start selling my product to those that need it. Vector is an awesome place to get my business going and not spend a fortune to do it.

This grain mill works great I’ve haven’t had any issues at this time I have used it a few times and all is well at this time.

I bought this mill to grind corn for my chickens and it has far exceeded what I thought it was able to do. I've basicly run over 200 bushels of corn though it and it's still going strong. Well worth every dollar I spent on it.

I had a bad time putting it together. Who ever welded the legs together did it backwards.So it leans and can tip over. I had to go buy another threaded rod that was longer and I'll bolt it down on a board to hold it in place. I ran a few cups of wheat through it and it did do a good job,the motor seem real strong.

I use this to grind a specific sodium crystal. It's much quieter than the previous grinder I used & the SS has held up decently. The grinding discs do rust a little but the clean up isn't as bad as carbon steel. I recommend the product.